Seajet 030 Warrior is an effective, low-cost antifouling paint designed for vessels operating in low to medium fouling conditions. It offers reliable protection and durability for boats cruising at moderate speeds and is suitable for various substrates, excluding aluminum.
Key Features:
- Economical Antifouling Solution: Provides dependable antifouling protection at a budget-friendly price point, effectively preventing the growth of marine organisms such as barnacles and algae.
- Versatile Application: Ideal for GRP, wood, and steel hulls. Not recommended for aluminum due to its copper-based formulation.
- Good Durability: Offers solid protection throughout the boating season in low to medium fouling areas, helping maintain hull cleanliness and performance.
Application Details:
- Application Methods: Seajet 030 Warrior can be applied using a brush, roller, or spray (professional use only), offering flexibility based on project requirements.
- Coverage Rate: Theoretical spreading rate is approximately 10 m² per liter, ensuring efficient coverage.
Preparation Requirements:
-
Surfaces must be high-pressure washed (±200 bar) and free of contaminants.
-
New GRP and steel substrates require sanding with P100 abrasive paper followed by Seajet 117 Multipurpose Epoxy Primer.
-
Wood substrates should be sanded and primed with Seajet 015 Underwater Primer.
-
Existing antifouling should be in good condition and compatible, or a barrier coat of Seajet 015 is recommended.
-
Not suitable for use on aluminum.
Technical Specifications:
- Colours Available: Black, red, and blue.
- Pack Sizes: Available in 0.75lt and 2.5lt options, making it suitable for small to medium projects.
- Environmental and Safety Considerations: As with all antifouling paints, handle with care. Avoid skin contact and inhalation of vapors. Store in a cool, dry, and well-ventilated area away from direct sunlight. Follow proper disposal procedures.
Usage Tips:
Mixing: Stir thoroughly until the product is uniformly mixed before application.
Drying Times:
-
Surface dry in 30 minutes at 20°C.
-
Hard dry in 4.5 hours at 20°C.
-
Minimum overcoating interval of 9 hours at 20°C.
-
Maximum overcoating interval is unlimited.
Launch Timing: Maximum immersion time after application is 6 months.
