Paint Specifications

Below water system

Below schemes are recommended for bare substrates. For existing antifouling, please check the compatibility chart. If compatible, apply the antifouling after wet sanding or directly on top. In other cases use Seajet 015 barrier coat and consult the TDS. Use the recommended primer for spot repair and always apply an extra coat on the waterline and leading edges. When a paint system is in bad condition, always remove it. Excessive layers of old antifouling can lead to detachment of the system from the hull.

Maximum immersion time after application is 6 months for all Seajet antifouling.

Above water system

Below schemes are recommended for bare substrates. For existing coating, please consult the TDS.